Prominance Collection
11 of 11 designs

Every Prominance design we fabricate sits in this catalogue. Answer six short questions and it ranks them for your room, your opening size and the things you actually care about.
Each design carries its own code and the full cut list behind it — the frame section it comes off, the reinforcement inside it, the hardware it runs on, every part under the item code the works orders it by. It is what the quotation software prints, not what a salesperson remembers.

11 of 11 designs
The four things we get asked about most.
The quotation software prints the full cut list per window — every profile with its item code, every screw, every metre of gasket, the reinforcement in each member and the weight of each shutter. Ask for the Design Assembly Report against your quote number and you get the same sheet the works cuts from.
Profile is Prominance, bought direct: the 62 mm casement and 2-track sections, the 93 mm 2.5-track and the 112 mm 3-track. Hardware is Prominance throughout — touch lock, pop-up handle, single wheel, friction stay — under the codes printed on the BOQ. Nothing is substituted for a cheaper equivalent without your written approval on the order.
Each design here lists the sizes it has actually been built at. Every Prominance profile is stocked in one 5.8 m bar, which is the real ceiling on a single unit — anything wider is coupled, and the coupler is a line on the quote like everything else.
Galvanised reinforcement goes into the frame and the sash, not just the frame: RI 14.5 × 30.5 in a sliding outer, RI 33 × 36 × 27.5 in the sliding sash, RI 34.5 × 22.5 C-section in a casement frame and a box section in its mullion. It is screwed in before the unit is glazed, and the cut lengths are on the report.
From enquiry to installed window.
Codes, sizes, finishes and quantities arrive with your contact details.
We confirm openings, sill levels and access before anything is priced.
Priced per design code, with the cut list and BOQ from the quotation software attached — no lump sums.
Cut and welded to that list, glazed, then installed and signed off.